Zva Fuel Vapor Recovery Nozzle
Zva DN 19 automatic nozzle is a fuel-dispensing nozzle with an automatic safety shut off for wet-hose use with electrical operated petrol dispensing pumps. For gasoline, diesel and fuel oil, not suitable for viscous oils and water or solvents.
Ø Working principle - The flow through the nozzle creats a vacuum at the valve seat. Air is drawn in through the sensing port at the tip of the spout, through the safety cut-out, past the diaphragm, and into the fuel.The valve will remain open while the air flows freely . When the fuel reaches the sensing port , suction builds up rapidly until it lifts the diaphragm and trips the automatic action which shuts the valve. The mechanic also trips if the ball of the safety cut-off rolls back to obstruct the free airflow.It will also occur if the spout is pointed upwards or if the nozzle is dropped onto the ground.The valve opens with the flow, allowing smooth low control for"to-the-penny" dispensing.It closes against the flow for a soft shock-less closure.
Ø All type of guards are available if requested.
Ø 100% Factory tested.
| Material |
| Body |
Aluminum |
| Spout |
Aluminum |
| Swivel |
Aluminum |
| Seals |
Buna-N, Viton |
| Covers |
PVC |
| Technical Specifical |
| Working Pressure |
0.2 Mpa |
| Flow Rate |
18-60 L/m |
| Auto Shut-off sensibility |
0.1 second |
| Spout Internal Diameter |
19mm |
| Intel Thread |
M34 × 1.5 |
| Net Weight |
1.1 KG |
Audited Supplier 
){kind=link}
){kind=link}