Fuel Tanker Dipstick Level Gauge
Product Description
Dipstick Level Gauge has clear and accurate scale. It should maintain straight in operation. The ruler frame, handle, core wheel and ruler
pendant are all made of antistatic materials.
The product meets the technical requirements of national standard GB/T13236-2011.
1. Specifications: 500, 800, 1000mm.
2. Material: the ruler plate is made of brass, and the handle is made of cabin.
3. Indication Deviation:
* Coefficient of linear expansion: (11.5 1) X10-6/ºC
* Tensile strength of ruler tape: > 1600N/mm2
4. Repeat labeling with smaller numbers at each decimeter after the first meter.
5. Weight of ruler drop: not less than 0.6kg
6. Max. Deviation:
| Ruler Length |
500mm |
800mm |
1000mm |
| Indication Deviation |
±1.5 |
±1.5 |
±1.5 |
| Note: The indication error from the zero end face of the ruler to the first line is 0.3mm. |
Installation Instructions
Usage: When measuring, insert the ruler body of the special ruler for star counting of the tank car into the cap of the tank car,
gently place the beam on the measuring position designated by the cap, let the ruler body immerse in the liquid, and then use
the ruler body for measuring the tank car. Lift the ruler and read the scale value of the liquid trace displayed on the ruler
surface. This value is the distance between the width of the tank car and the page inside the tank car, that is, the space height.
Precautions:
1. Measure the tank car after the liquid level is stable.
2. The beam of the special ruler for tank car measurement is placed on the cap mouth, and once it contacts with the cap mouth,
it can be read.
3. Don't wipe the used special ruler for tank car measurement at the upper end of the tank car cap.
4. Don't wipe the special ruler for tank car measurement with chemical fiber and items that are easy to generate static electricity
to prevent static electricity.
Company Profile
Audited Supplier 
){kind=link}
){kind=link}